Marine Corps Seal, Emblem, Insignia, Patch & Command Board Plaques
ALL OF OUR SIGNS & PLAQUES ARE MADE IN THE USA BY AMERICAN CRAFTSMEN
WELCOME TO OUR PHOTO GALLERY OF US MARINE CORPS PLAQUES
Welcome to the Marine Corps plaque page of the website of The Wood & Metal Plaque Company, a division of Art Sign Works, Inc. that specializes in designing and manufacturing custom plaques.
If you have just entered our website and you want an overview of our company and all our products, please start with our HOME page ( tab in gold masthead at top of page), which has a listing of all plaque types in the silver box on the left side of the page. Other web pages and photo galleries can be visited by clicking on the titles and pull down menus in this gold masthead These include Federal and State government & agencies & courts, local Government (county, city & village), police & sheriff, and fire department wall plaques (including badge and shoulder patch plaques). These can be accessed through pulldown menus accessed by clicking on plaque TYPE in the gold masthead above.
This page provides a description and photo Gallery of our standard, custom, and personalized wall and podium plaques for Marine Corps units, officers, and other personnel. We design and carve a wide variety of custom and personalized hand-crafted wood and metal dimensional wall and podium plaques of seals, emblems, logos, badges, insignia, memorials and awards. We offer the highest quality materials and workmanship, great customer service, short turnaround times (typically 30 days from order to shipment), and factory-direct affordable prices to government, commercial, non-profit and consumer clients. We also offer wholesale prices to retailers and re-sellers, and discounts for buys of 3 or more identical plaques. All our plaques are manufactured in the USA by Americans using American-made materials.
We have many styles and materials, and can make plaques in sizes from 10 inches to 10 feet in diameter. This page shows plaques for the great Seal of the US Marine Corps, unit insignia & crests, and personalized plaques. Photo Galleries and descriptions of plaques of the seals and unit crests for the DoD and the other four armed forces (US Navy, US Air Force, US Army, and US Coast Guard) are shown in the other Galleries in this section, which can be viewed by clicking on the underlined link or by clicking on its name listed horizontally immediately below the gold masthead above.
We make attractive and authentic custom carved plaques from natural wood, artist-painted High-Density-Urethane (HDU) composite, and bronze, brass, nickel-silver, aluminum-plated and 24K gold and silver-leaf plaques of all sizes and designs for the Marine Corps. See our STYLE section for a discussion of these, accessed through a pulldown menu under STYLE in the gold masthead above.
We make custom crest and seal wall, ship and podium plaques. These plaques include organization and unit identity, command boards, unit / individual recognition & awards, and personnel retirement and memorial plaques. We have an official license from the US Marine Corps trademark office to produce Marine Corps seal and emblem plaques.
If you have questions on a specific type of plaque you are interested in, or you want information on our plaques or prices, you are always welcome to call Christie or Regina at 951-698-8484 or you can email us at email@example.com and we will respond quickly.
In this gallery and the other Armed Forces galleries, we have a total of over 600 photos of wall plaques and signs that we have made of military seals, crests, emblems, badges, insignia, medals, flags, and shoulder patches. We make ship signs, base entrance signs, building signs, way-finding signs, command boards, podium plaques, wall signs and door signs.
We offer custom carved 2-D, 2.5-D, 3-D and engraved dimensional authentic wall plaques of all sizes, from 10 inches to 120 inches in diameter, which are made from multi-color painted carved High-Density-Urethane (HDU), wood (cedar, redwood, mahogany, oak, maple, cherry), and metal-coated HDU (brass, bronze, copper, silver-nickel, stainless steel, and aluminum). We will work with you to design and build the exact wall plaque you want. We can customize the size, shape, carving relief, text, materials, and color scheme of any plaque shown on this page, and we can make a custom plaque for ANY artwork you may have. Send us a drawing, a photo or a rough sketch of your seal or crest, and we will design and make a carved dimensional plaque to your specifications. We have a large library of existing 3-D and 2.5-D computer models that we use to carve these plaques, which greatly reduces graphic artist labor costs.The various styles of the plaques we make are described in our plaque STYLES section (click on "STYLES" on upper gold masthead to access pulldown menu). All our plaques are manufactured in the USA by American craftsmen.
We can also combine materials on a plaque. We often use Mahogany plaque boards and carve 3-D HDU appliques which are either multi-color painted or metal-plated, to mount on the Mahogany. We can cut out text and artwork from thin sheets of aluminum and mount these on 2.5-D Mahogany or cedar plaques with raised text and art; we call these metal-clad wood plaques. The contrast between the shiny metal and rough dark wood is striking. We often gild V-carved text of Mahogany plaques with 24K gold or silver leaf. We can also gild areas of painted HDU plaques, usually raised text and art. We also make separate cut-out metal, stained wood and painted HDU letters. We can provide a 3-D bas-relief cast bronze and aluminum memorial or living person plaque featuring the face or figure of an officer or enlisted man, etc. if we are provided a good photograph.
Although we show primarily painted High-Density-Urethane plaques on this page, we can make any plaque out of natural wood (stained) or put any of several types of metallic coatings/color schemes on them . We can also put digitally printed long-lasting full color giclee vinyl (photos or very elaborate painted or digital art) as an applique on any HDU or wood plaque. For Command Boards, we make photo frames with glass covers where photos and names can be easily replaced when there are personnel changes. These are described in the Command Boards and Award Boards STYLE sections.,
PLAQUE RETAIL PRICES
Our plaques have wide variations in prices, depending on size and style. Fig. 5 below shows our three basic relief styles, 2-D flat relief , 2.5-D multi-level relief, and 3-D bas-relief. These can be made of different materials, including natural wood, artist-painted High-Density-Urethane (HDU) , metal-coated HDU, and acrylic. Our STYLE page describes these in detail. All 2000 photos of plaques on this website has a Style Category and a Price Code listed in the second or third paragraph in the text description under the photo (click on the photo or title to expand the photo and read the text to get the price code of that plaque, then look up the price for different size plaques with that style on the Price List at the bottom of the PRICE page).
2-D Giclée Economy Plaques. Our lowest price economy 2-D giclee printed plaques feature digitally-printed full-color giclee vinyl appliques mounted on a round or rectangular solid wood or acrylic base. The retail prices for this type of two-dimensional (2-D) flat custom plaque are as low as $92 (Sintra base) to $102 (Mahogany veneer wood base) for 10 inch diameter plaques. A set of 5 matched 10 inch diameter service Sintra plaques has a price of $414 plus shipping. The same style plaques in a 18 diameter size have prices of $145 (Sintra) and $170 (Mahogany veneer) each. A set of five 18 inch diameter matched Sintra giclée plaques (an example is Navy, Army, Marine Corps, Air Force, and Coast Guard seal plaques) has a price of $825.
These low prices assume we have made a previous plaque of the same artwork design ( featured in one of our Galleries of over 2000 photos, including photos of 3-D plaques), or for new artwork, that we are provided a print-ready JPEG photo or colored drawing of the artwork for the plaque. These are styles 1.4.1 ( Mahogany veneer base) and 1.4.3 (Sintra base) shown in the table at the bottom of the PRICE page. Many examples are shown on our 2-D Giclee Plaques web page. A set of five or more service/Agency plaques has a discount of 10% compared to these individual plaque prices. We use high-resolution photos of our 3-D carved artist-painted, metal-plated, or stained wood plaques, rather than line drawings from the internet; from a distance they look exactly like our 3-D carved plaques, except they are flat instead of 3-D. They are gorgeous because of the very high quality glossy color printing and because they are photos of our 3-D carved plaques, rather than colored line drawings.
Carved 2.5-D Multi-Level Plaques. Our carved 2.5-D multi-level or engraved hand-crafted and artist-painted plaques have prices about twice that of the 2-D flat plaques with giclee printed art. These prices depend on the size, material, carving complexity, and number of colors. Prices for custom carved 18 inch diameter 2.5-D artist-painted HDU or stained wood custom plaques vary from $240 to $385. Prices increase with size. The table at the bottom of the PRICE page gives prices for carved 2.5-D plaques of various sizes, materials, styles, and number of colors. About 80% of our military unit plaques are carved in 2.5-D multi-level flat or engraved relief, using High-Density-Urethane (HDU) as the substrate. These are very popular and look great. Many times the artwork provided to us for custom military plaques does not benefit from 3-D rendering, and we recommend a 2.5-D relief carving which looks nearly as good as 3-D and is 1/2 to 2/3 the price. Our 2.5-D relief plaques carve faster and are much faster to paint than 3-D bas-relief plaques, so they have lower prices. Most of our military and many of our government, university and corporate plaques are carved in 2.5-D relief.
Carved 3-D Bas-Relief Plaques. Our premium plaques are carved in 3-D bas-relief, using wood (usually Mahogany, Cedar, or Redwood), or High-Density-Urethane (HDU) as the substrate. These are higher- priced carved 3-D bas-relief artist-painted plaques, and have prices about 3 times that of the 2-D plaques. These are very high quality plaques, which usually feature great seals, and are often ordered by higher level commands in the military services, federal and state government agencies and courts. Prices for 18 inch diameter 3-D artist-painted or bronze, brass or silver-plated HDU or stained wood custom plaques vary from $380 to $585 each. Prices increase with plaque size. The table at the bottom of the PRICE page gives prices for carved 3-D plaques of various sizes, materials, styles, and number of colors. These high-quality plaques may require from 8 to 24 hours of machine carving time, and then 4 to 8 hours of artisan work to hand-sand and artist-brush paint or metal polish them. They are unique works-of-art for our most discriminating clients.
Chain-of-Command and Award Boards. We design and make custom wood and HDU chain-of-command and award boards of all sizes from 24 inches to 120 inches wide, for all five services. These are typically made of wood (African Mahogany, Redwood, Cedar and Oak) but we also make them from High-Density Urethane (HDU). These fully custom typically have several of the following features:
- carved raised painted text for permanent positions (e.g., CO) or awards (e.g. marine of the month)
- picture frames with glass covers for easy to change-out photos,
- brass slide in holders for engraved brass name plates which can be changed out,
- 2.5-D multi-level or 3-D bas-relief carved and artist-painted or metal-plated crests, insignia or seals
- for small, very detailed insignia, printed giclee vinyl appliques mounted on carved pedestals
These are described in the Command Boards and Award Boards STYLE sections.,Prices for these wood large command and award boards range from about $1000 for smaller boards (2 ft x 2 ft) to over $3500 for very large boards (i.e., 6 x 5 ft). Boards made of HDU instead of wood are significantly less. Call us at 951-698-8484 or email us at firstname.lastname@example.org for specific prices for your custom command and award board .
Fig 6 - We make plaques in three different styles of relief, as shown above. Engraved plaques are in the same price category as 2.5-D relief plaques. Prices increase from left to right.
CONTENTS OF US MARINE CORPS PLAQUE PHOTO GALLERY
This Gallery contains photos and designs of wall and podium plaques of the seals, emblems, logos, and crests of the US Marine Corps. Plaques for other four services are given on four other webpages ( US Navy, US Air Force, US Army, and US Coast Guard) in this Military section.
This Gallery is organized in the following sections, listed in order top to bottom on this page (click on gold underlined text link to go directly to that section or page):
- US Marine Corps Great Seal and Emblem- top of page, begins with photo KP-1000
- Unit Insignia, Patches and Crests - begins with KP-2000
- Personalized Plaques - begins with KP-3000
PLEASE CONTACT US
Please call or email us for a price quote on a specific plaque. We will work with you to design and build the exact plaque you want. One of our knowledgeable and helpful Customer Service Representatives, Christie, Regina, or Liz, will respond to your request promptly. Call us at 951-698-8484 or email us at email@example.com. Or, you can fill out and submit our on-line Request a Quote form. We would like to make your plaque, and we are confident that you will be pleased with it. We take great pride in every product we make for our valued clients. We offer a 2 year warranty on all our products, and our indoor plaques will last many decades without degradation.
You can view the bottom of the page using the slider on the scroll bar in the right margin. You can click on a photo or a title of a photo below to see an expanded view and a description of that plaque. You can return to this page by clicking on Return to List on the bottom left of each plaque title or description, or by using your back browser button. You can go to another Section or Gallery page by clicking on an item in the pull-down menus in the gold masthead at the top of the page.
You can search for a specific plaque type (e.g., "FBI" ) by entering the key word in the search box in the upper right of the gold masthead. You can view a list and use the navigation bar for all 24 Gallery types by viewing the silver box on the left side of the Home page. You can view a description of different plaque styles by going to the Style section listed above in the gold masthead. To request information, request a design and a quote, send a file, or to place an order, click on the text (e.g., "contact ", "quote", "file" or "order") in the far upper right of the gold masthead at the top of this page. All prices are given on the "Price" page in the menu in the gold masthead.
For more information on design options, prices and delivery times, please call us at 951-698- 8484 or email us at firstname.lastname@example.org, and our knowledgeable and friendly customer service representatives Christie and Regina will be pleased to help you.